Poli-Flex® Printable 4655

Technical Data: Transfer Film: Polyurethane, cast
Adhesive: Polyurethane-hotmelt
Thickness in [mm]: 0.075 +/- 5%
Liner: PET-film, non adhesive
Transfer Conditions: Temperature: 160 °C
Pressure: 2.5–3.0 bar [average pressure]
Time: 15 sec.
Wash resistance: 60 °C
Only use colour or mild detergent
Wash textile inside out
Suitable for tumble drying
Printing: On reverse, mirror-inverted
Heat-sealable, printable Polyurethane-film (transparent) suitable for white textiles
POLI-FLEX® 4655 is a two-layer transfer film being coated with a hotmelt on the non-covered printable side
The upper side of the film after the application process is based on a transparent, UV-resistant polyurethane
POLI-FLEX® 4655 is compatible with all current inkjet printers using ECO-solvent and solvent inks. The non-adhesive PET film allows even the most intricate motifs to be cut after printing using a CAD/CAM plotter
After weeding the heat transfer is done with the original carrier
A matt PET-film on top of the image during the thermal transfer gives a brilliant semi-matt finish
After heat-transfer we recommend removing the PET-liner after a short period of cooling down to room temperature
The transfer film is used for motifs and logos on sport, leisure and work wear
Fabrics that have a water-repellent finish or waterproofing are not suitable for heat transfers
We recommend to carry out an application test on original materials
Due to the various influences resulting from the production and transfer of the transfer film, the nature of the materials and the washing and cleaning conditions, product liability can only apply to unprocessed materials.

• 100% Polyurethane