Ultimate Print Nylon 4035

Technical Data: Transfer Film: Polyurethane, cast
Adhesive: Polyamide-hotmelt
Thickness in [mm]: 0.10 +/- 5%
Liner: PET-film, non adhesive
Transfer Conditions: Temperature: 150 °C
Pressure: 2,0 bar [medium pressure]
Time: Pre-pressing: 4 sec.
Remove polyester liner when lukewarm
Second pressing: 10 sec.
Wash resistance: 40 °C
Wash textile inside out
ULTIMATE PRINT NYLON 4035 is a Polyurethane transfer film (opaque white, 100 μ) with a special heat sealing adhesive for hydrophobic and impregnated nylon textiles
ULTIMATE PRINT NYLON 4035 offers a high print resolution with a semi-matt finish
It is printable with Eco-Solvent and Solvent inks
Even filigree letters and motives can be cut and weeded after printing without any problem due to the non adhesive PET film liner
ULTIMATE PRINT NYLON 4035 can be cut with all current plotters
We recommend using a standard blade (45°)
After weeding, the cut flex film is transferred for 3-4 sec. by heat press übertragen
The PET liner should be removed lukewarm
After cooling down, the material is pressed for another 10-15 sec. with the same parameters nachzupressen
We recommend the use of POLI-TACK 854 + 870 for transfer and as a protective cover during hot transfer
The soft, elastic transfer film offers a comfortable textile touch and convinces due to high wearing comfort
ULTIMATE PRINT NYLON 4035 excels due to an excellent opacity
The raw materials are ecologically inert, do not contain PVC, plasticizers or heavy metals
Only if the specified temperature and pressure conditions of the hot transfer are maintained can a secure and permanent anchoring of the flex film be guaranteed
We recommend to carry out an application test on original materials
Due to the various influences resulting from the production and transfer of the transfer film, the nature of the materials and the washing and cleaning conditions, product liability can only apply to unprocessed materials.

• 100% Polyurethane